This guide covers most solutions for E-1 codes
 



1. Error Overview

 

Definition: The generator has detected high temperatures within the generator.

 

2. Symptom Checklist

  • Error code is displayed on the iPM Generator and external controllers.

3. Potential Root Causes

  • Temperatures exceeding the rated levels inside the generator
  • Temperature sensor has failed and is incorrectly reading

4. Step-by-Step Resolution

  • Check that the internal cooling fans operate correctly.
  • If inside the iCorona cabinet, be sure the cabinet fans are properly working.
  • All filters are clean and flowing.
  • Check for high ambient temperatures.
  • Check for easy airflow around the generator.

5. Escalation

  •     If you have verified the steps above please contact support to investigate further. This may require a remote session to verify the generator temperatures.