| E1 (Generator Overtemp) | ||||
Prepared by: EH | Approved by:
| Valid from: 280426 | Document no.:
| Rev. no.
| |
1. Error Overview
Definition: The generator has detected high temperatures within the generator.
2. Symptom Checklist
- Error code is displayed on the iPM Generator and external controllers.
3. Potential Root Causes
- Temperatures exceeding the rated levels inside the generator
- Temperature sensor has failed and is incorrectly reading
4. Step-by-Step Resolution
- Check that the internal cooling fans operate correctly.
- If inside the iCorona cabinet, be sure the cabinet fans are properly working.
- All filters are clean and flowing.
- Check for high ambient temperatures.
- Check for easy airflow around the generator.
5. Escalation
- If you have verified the steps above please contact support to investigate further. This may require a remote session to verify the generator temperatures.